New Product Release: Pro-Line Trencher HP 3.8″ All Terrain BELTED Tires Mounted on Raid 8×32 Removable Hex 17mm Wheels

Hot on the heels of their 2.8″ Trencher HP Belted tires are these up-sized 3.8″ variants for 1/8 monster trucks. The new belted tires are designed to be more stable at high speed and to eliminate ballooning. Pro-Line’s proprietary herringbone weave pattern belt resides inside the “relentless, tall and grippy tread of the new Trencher HP.” The HP’s are mounted to Pro-Line’s new 8×32 removable hex wheels that accept 17mm hexes and mimic the mounting pattern of modern “Heavy Duty” diesels. The Trencher 3.8″ HP’s measure 6.70″ tall and 4.15″ wide and are molded in Pro-Line’s M2 (medium) compound.

As a note from the engineers at Pro-Line:

” Please note that the Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 3,500 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by “diffing out” your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.”

Item # 10155-10

Link: https://www.prolineracing.com/tires/trencher-hp-3.8-all-terrain-belted-tires-mounted.asp

Leave a Reply

Your email address will not be published. Required fields are marked *